ISN RAVS Review for Granite Construction Contractors

Granite Construction Required Safety Programs

28 safety programs required for ISN compliance with Granite Construction. Raven can review, repair, or build each one.

Fall Protection

29 CFR 1926.502 / 1910.28-29

Hazard Communication / GHS

29 CFR 1910.1200

Lockout/Tagout (LOTO)

29 CFR 1910.147

Confined Space Entry

29 CFR 1910.146

Respiratory Protection

29 CFR 1910.134

Electrical Safety

29 CFR 1910.331-335 / NFPA 70E

Fire Prevention & EAP

29 CFR 1910.38-39

Excavation & Trenching

29 CFR 1926.650-652

Scaffolding

29 CFR 1926.451-454

Crane & Rigging

29 CFR 1926.1400-1442

Forklift / PIT

29 CFR 1910.178

Drug & Alcohol Program

DOT 49 CFR Part 40

Hearing Conservation

29 CFR 1910.95

Personal Protective Equipment

29 CFR 1910.132-138

Incident Investigation

29 CFR 1904

Job Safety Analysis (JSA/JHA)

OSHA Publication 3071

Driving / Fleet Safety

FMCSA 49 CFR 390-396

Contractor Safety Management

OSHA Multi-Employer Policy

Environmental Compliance

CAA / CWA / RCRA / EPCRA

Aerial Lift / MEWP

29 CFR 1926.453 / ANSI A92

Hand & Power Tools

29 CFR 1910.241-244

Silica Exposure Control

29 CFR 1926.1153 / 1910.1053

Heat Illness Prevention

OSHA Heat NEP / 29 CFR 1926.21

Hours of Service (HOS)

FMCSA 49 CFR Part 395

Vehicle Maintenance / DVIR

FMCSA 49 CFR 396

Stop Work Authority

OSHA General Duty / ISN Best Practice

Subcontractor Management

OSHA Multi-Employer Policy

Emergency Response Plan

29 CFR 1910.120 / HAZWOPER

Three Ways to Get Compliant

Review what you have, repair what's failing, or build from scratch.

Review

$29

Upload your safety program and Raven grades every element against the RAVS checklist. Get an A-F grade and specific fix instructions.

Start a Review

Repair

$49

Got a program that's not passing? Upload it and Raven reviews it, finds the gaps, and rewrites the failing sections.

Repair a Program

Build from Scratch

$299

Don't have safety programs yet? Raven writes complete, OSHA-compliant programs tailored to your company.

Build a Program

Document Verification

In addition to safety programs, Granite Construction requires verification of these documents for all contractors.

Certificate of Insurance

ACORD Forms

Experience Modification Rate

NCCI Worksheet

OSHA 300/300A Logs

29 CFR 1904

Frequently Asked Questions

What programs does Granite Construction require for ISN?

Granite Construction requires 28 safety programs for ISN RAVS compliance. These include core programs like Fall Protection, Hazard Communication, and Lockout/Tagout, plus industry-specific programs based on Granite Construction's operational requirements. Use our free Gap Analysis tool to see the full list and compare it against what you already have.

How do I pass Granite Construction's RAVS review?

To pass Granite Construction's RAVS review, each of your 28 required safety programs must meet every element on the ISN RAVS checklist. RAVS Pass reviews your programs element-by-element, identifies exactly what's missing or deficient, and gives you specific fix instructions. You can also have Raven repair or rewrite programs that aren't passing.

How long does it take to get ISN compliant for Granite Construction?

With RAVS Pass, you can review a single program in under 5 minutes. If you need repairs, Raven rewrites deficient sections instantly. Building a complete program from scratch takes about 10 minutes. For Granite Construction's full 28-program requirement, most contractors complete their review and repairs within a few days.

What happens if my program fails Granite Construction's RAVS review?

If a program fails Granite Construction's RAVS review, RAVS Pass shows you exactly which elements are deficient and why. You can then use our Repair tool to have Raven automatically rewrite the failing sections while keeping compliant sections intact. Or if the program needs a full rewrite, use the Build tool to generate a complete, RAVS-ready replacement.

ISN RAVS Compliance for Granite Construction Contractors